Candleholder
Create this stylish candleholder from an old table leg and a block of timber and finish it off with easy-to-use Resene Colorwood Enhance and Resene Aquaclear.
Ways with wood with Mark Rayner – 53
Difficulty level: Easy
You will need: a clean cloth, paintbrush, paint stirrer, piece of dressed timber measuring approx 90mm x 90mm x 40mm (ours came from a renovator’s centre), PVA glue, sandpaper, saw and a wooden table leg. Resene Aquaclear gloss and Resene Colorwood Enhance – Resene Black.
To get the look: Mark painted the background wall with Resene SpaceCote Flat tinted to Resene Vitra.
Other ideas: For a lighter brown finish use Resene Colorwood Enhance in Resene Walnut.
Step one
Cut the timber to size and trim the table leg to a 300mm length.
Step two
Smooth any rough edges with sandpaper and wipe off any sanding dust with a clean cloth.
Step three
Lightly sand the table leg and wipe off any sanding dust with a clean cloth.
Step four
Fix the table leg to the centre of the block of timber, as shown, using PVA glue. Allow glue to dry.
Step five
Shake the Resene Colorwood Enhance.
Step six
Carefully pour the Resene Colorwood Enhance into the Resene Aquaclear and stir thoroughly.
Step seven
Apply one coat of the coloured Resene Aquaclear to the candleholder and allow two hours to dry.
Step eight
Step eight Apply a second coat of the coloured Resene Aquaclear to the candleholder and allow two hours to dry.
Always ensure lit candles are under adult supervision. Always extinguish all candles before going to sleep. Replace candles when they are at least 20mm from the top edge of the candleholder.
Other projects you might like to try
Garden coffee table
Weekend DIY
Drawer shelf
Weekend DIY
Display table
Ways with wood
Wooden tray
Ways with wood
Simple cold frame
Weekend Gardener
Outdoor shelves
Weekend Gardener