Developed specifically for professional flooring contractors, Resene ProSelect Naturadd is a matting concentrate to reduce sheen and/or provide a more natural timber appearance.
Physical properties |
|
|---|---|
| Material type: | Combination wax & organic matting agents |
| Solvent: | Water |
| Finish: | To achieve Low Sheen to Ultra Matt |
| Dose Rate: | Up to 20% by volume per Litre of Base |
| Usual no. of coats: | Can be added to all coats or the final coat |
| Cleanup: | Water or Soapy water |
For use by experienced professional applicators only.
Ensure Resene ProSelect Naturadd is added and mixed thoroughly into the Base BEFORE the addition of Cure.
During application of the finished product DO NOT overwork and DO NOT spread too thin.
Mechanical stir. Do not shake.
Select desired finish and then mix appropriate components and additives according to the Resene ProSelect Mixing Chart.
Dose Rate: Up to 20% by volume per L of Base. Refer to the Resene ProSelect Mixing Chart.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
15 August 2017