Developed specifically for professional flooring contractors, Resene ProSelect V-Hold provides resistance to runs and sags when applying ProSelect finishes to vertical surfaces such as stair risers, balustrades etc.
Physical properties |
|
|---|---|
| Material type: | Polyurethane thickening additive |
| Solvent: | Water |
| Finish: | Suitable for use in all Resene ProSelect finishes. |
| Dose Rate: | Up to 25 mL per Litre of Mixed Product |
| Usual no. of coats: | Can be added at any stage to the mixed product. |
| Cleanup: | Water or Soapy water |
For use by experienced professional applicators only.
Add when required at any time during the pot life. Mechanical stir. Do not shake. Product will thicken after addition of V-Hold. DO NOT add more than the specified Dose Rate.
Dose Rate: Up to 25 mL per L of mixed product.
Water or soapy water.
Add into the mixed Resene ProSelect product and then apply with a high quality synthetic fibre brush or application pad.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
15 August 2017