Resene ProSelect Colour Concentrate
Developed specifically for professional flooring contractors, Resene ProSelect Colour Concentrates use durable coloured pigments (not dyes) and are designed to be added to the Resene ProSelect Stain Base. Combinations of different colour concentrates allows a vast colour range to be achieved putting the control back into the flooring professional’s hands.
Physical properties |
|
|---|---|
| Material type: | Durable pigment concentrate with binder |
| Solvent: | Water |
| Dose Rate: | Up to 20% (by volume) into ProSelect Stain Base |
| Colours: | Black / White / Dark Brown / Red Brown / Yellow Brown |
| Cleanup: | Water or Soapy water |
Typical uses
- To colour ProSelect Stain Base
| VOC (g/L) | |
|---|---|
| Dark Brown | 29 |
| Red Brown | 46 |
| Yellow Brown | 54 |
| Black | 52 |
| White | 42 |
Resene ProSelect Colour Concentrate samples mixed, diluted and applied to Bleached Australian Oak (Oak (aka Victorian Ash/Tasmanian Oak)
Black
White
Dark Brown
Red Brown
Yellow Brown
Mixing
For use by experienced professional applicators only. Shake well before use. Add Resene ProSelect Colour Concentrate to achieve desired colour and strength. Shake or stir well until colour is even. Best used within 48 hours after adding colour concentrate to the ProSelect Stain Base.
Dose Rate: Typically 10% (by volume) is suitable for most timbers. Up to 20% (by volume) can be added to achieve a stronger colour effect.
Precautions
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Storage/Transport
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Downloads
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
30 August 2017