Resene ProSelect Clean is a low VOC, environmentally friendly and biodegradable cleaner for use on Resene ProSelect coated floors. Safe to use and leaves a streak free finish. Specifically designed to be used with a micro-fibre spray mop. Available as ready to use or in a concentrate form.
Physical properties |
||
|---|---|---|
| Active material: | Biodegradable non-ionic surfactant and degreaser | |
| Diluent: | Water | |
| Dose Rate: | Mix 1 part Concentrate to 10 parts water (by volume) | |
| VOC: | Concentrate: 25 g/L | Ready to Use: 2 g/L |
Mix 1 part Resene ProSelect Clean Concentrate to 10 parts water (by volume). For particularly dirty floors mix a stronger solution at 1 part Resene ProSelect Clean Concentrate to 5 parts water.
Simply vacuum or dry mop the floor to remove excess dirt, grit and dust.
Using a micro-fibre spray mop, spray/mist a small area of the floor and wipe in the direction of the grain. Allow to dry before walking on the clean surface. DO NOT wet mop the floor. For particularly stubborn dirty marks, spray directly onto the affected area and allow the cleaner to work several minutes before wiping off with a micro-fibre cleaning pad.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
30 August 2017