Developed specifically for professional flooring contractors, Resene ProSelect Anti-Slip is an additive for the ProSelect system providing wet slip resistance sufficient to meet the requirements of the NZ Building Code & AS 4586:2013.
Physical properties |
|
|---|---|
| Material type: | Silica glass microbead |
| Solvent: | Water |
| Finish: | Micro texture |
| Dose Rate: | 100 mL per Litre of Base |
| Usual no. of coats: | One - add to the final coat |
| Cleanup: | Water or Soapy water |
For use by experienced professional applicators only.
Can be mixed into ProSelect bases before adding Cure and diluent or after all other components are mixed. Mechanical stir. Do not shake. Agitate the mixture periodically during application to ensure a uniform mixture is maintained.
To achieve a P4 rating the specified dose rate must be achieved and the finish spread to evenly distribute the antislip material.
100 mL per litre of base or 80mL per litre of ready-to-use (premixed) ProSelect finish to achieve a P4 wet slip resistance rating. Lower dose rates will provide lower levels of slip resistance. Do not exceed the specified dose rate by more than 20%. Refer to the ProSelect Mixing Chart.
Use of this anti-slip additive will alter the appearance of the finish providing a surface with a smooth micro-texture. Do NOT add ProSelect Anti-Slip to finishes containing Naturadd – replace Naturadd with ProSelect Anti-Slip where slip resistance is required.
Refer to the ProSelect Gloss Level Chart to compare gloss levels with and without the Anti Slip additive.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
November 2017