Waka Kotahi/NZTA S10

Summary of Resene Anti-Graffiti systems approved for use

Testing is undertaken within the requirements of Waka Kotahi/NZTA Specification for Anti-Graffiti Coatings - Austroads Technical Specification ATS-5820 Anti-Graffiti Coatings.

The following classifications are based on systems independently tested to AGBT-T750.

They should not be used as a project specific specification but as a starting point when designing a system for a particular situation. Please refer to a Resene Representative for full system specification.

CSIRO Specimen No.

XC3984-01

Pigmented product systems for concrete panels:

1^st coat: Resene Uracryl 402 (semi-gloss) RA55 thinned 15% with Resene Thinner No.8
2^nd coat: Resene Uracryl 402 (semi-gloss) RA55 + Altex Easy Clean SX added at 2.5% by volume

NZTA/Waka Kotahi S10 Approved?

CSIRO Specimen No.

XC3984-02

Pigmented product systems for concrete panels:

1^st coat: Resene Uracryl 404 (low sheen) RA59 thinned 15% with Thinner No.8
2^nd coat: Resene Uracryl 404 (low sheen) RA59 + Altex Easy Clean SX added at 2.5% by volume

NZTA/Waka Kotahi S10 Approved?

CSIRO Specimen No.

XC3983-03

Clear product systems for concrete panels:

1^st coat: Resene Solventborne Aquapel D65S
2^nd coat: Resene Uracryl 403 (Gloss) Clear RA56 thinned 15% with Resene Thinner No.8
3^rd coat: Resene Uracryl 402 (semi-gloss) Clear RA55
4^th coat: Resene Uracryl 402 (semi-gloss) Clear RA55 + Altex Easy Clean SX added at 2.5% by volume

NZTA/Waka Kotahi S10 Approved?

CSIRO Specimen No.

XC3984-04

Clear product systems for concrete panels:

1^st coat: Resene Solventborne Aquapel D65S
2^nd coat: Resene Uracryl 403 (gloss) Clear RA56 thinned 15% with Resene Thinner No.8
3^rd coat: Resene Uracryl 404 (low sheen) Clear RA59
4^th coat: Resene Uracryl 404 (low sheen) Clear RA59 + Altex Easy Clean SX added at 2.5% by volume

NZTA/Waka Kotahi S10 Approved?

– Download this page as a PDF –

Please contact Resene for a project specific specification

Email Resene