Developed specifically for professional flooring contractors, Resene ProSelect Fast Set is an accelerator for increasing cure speed under colder conditions or where rapid turnaround is required.
Physical properties |
|
|---|---|
| Material type: | Molybdenum based catalyst |
| Solvent: | Water |
| Usage: | To accelerate Mixed ProSelect Base |
| Dose Rate: | 10% by volume of mixed product. Replaces water or Resene ProSelect XTend when thinning |
| Usual no. of coats: | Can be added to all coats or the final coat. |
| Cleanup: | Water or Soapy water |
For use by experienced professional applicators only.
Replaces water or Resene ProSelect XTend when thinning.
Add after Base, Cure and any Additives have been thoroughly mixed. Mechanical stir. Do not shake. DO NOT add more than the specified Dose Rate.
Dose Rate: 10% by volume of mixed product (replaces water or ProSelect XTend when thinning).
Water or soapy water.
Note: Resene ProSelect Fast Set does not change the evaporation rate of water. To aid in drying ensure good ventilation during the application and drying period.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
15 August 2017