Developed specifically for professional flooring contractors, Resene ProSelect XTend is an additive for extending wet edge time, particularly useful during application on hot days or where areas are exposed to direct sunlight during application.
Physical properties |
|
|---|---|
| Material type: | Glycol ether |
| Solvent: | Water |
| Finish: | Suitable for use in all ProSelect finishes |
| Pot Life: | Does NOT affect Pot Life |
| Dose Rate: | 10% by volume of mixed product. Replaces water or Resene ProSelect Fast Set when thinning |
| Usual no. of coats: | Can be added to all coats or the final coat. |
| Cleanup: | Water or Soapy water |
For use by experienced professional applicators only.
Replaces water or Resene ProSelect Fast Set when thinning.
Add after Base, Cure and any other Additives have been thoroughly mixed. Mechanical stir. Do not shake. DO NOT add more than the specified Dose Rate.
10% by volume of mixed product (replaces water or ProSelect Fast Set when thinning).
Water or Soapy water
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
April 2018