b'Environmental Product Declaration | Resene Aquaclear About this EPDProduct covered in this EPD: Resene Aquaclear Considered in this EPDThisEPDhasacradletogatescopewith clear waterborne urethane varnishinteriorEco Choice approved options, Modules C1C4 and Module D (A1A3,A4+A5+C+D).Itincludesthe environmental impacts associated with:Resene Aquaclear is a clear waterborne urethaneExtracting, processing (A1) and transporting designed to protect and enhance interior timber(A2) raw materialssurfaces with a non-yellowing finish. Manufacturing(A3),distributing(A4)and applying the product (A5)Its available in a range of sheen levels as a lowDemolishing (C1), end-of-life transport (C2), VOC and low odour alternative to solventbornewasteprocessing(C3)andwastedisposal urethanes. To rejuvenate or enhance the timber(C4) of the painted wall* colour,useReseneColorwoodnaturalwoodReuse, recovery, and recycling potential (D). stain first or mix Resene Aquaclear with Resene Colour Enhance. The use stage (B1B7) is not included in this EPD as it varies by building type and consumer Typical uses: needs. Thepaintreachesend-of-lifewiththe Cork,desks,doors,fibreandparticleboard,surfaceitisappliedto.Machinery(e.g. furniture,panelling,parquet,skirtings,solidexcavator) demolishes the surface. timber and veneers. As surfaces and the paint that covers them are generallynotrecycled,wasteprocessingfor reuse and recycling (C3) is not relevant. After painting however, unused paint and pails can berecycledandthisisincludedin A5andD where relevant.*Impacts and indicators related to waste are considered in the module in which the waste occurs in line with the polluter pays principle specified in EN 15804.resene.com Return to contents|6'